Garrett AT Pro vs Minelab Safari
Ground metal detectors of one category basically have similar set of functions and similar search possibilities, however in practice the results of search may differ depending on experience of treasure, accuracy of settings of this device and Optimal choice of tools for specific search terms.
Professional-purpose Detectors Garrett at PRO and Minelab Safari have similar functionality and are used for the same situations, namely to search for coins, hoards, relics, jewelry on the beach and shallow water, conditions of high humidity Near water bodies, and also used by professional geologists for reconnaissance works.
The main pros and cons of the metal detector Garrett AT PRO and Minelab Safari
Design. Each device has its own design features, although the size and overall structure are quite similar. Unlike Garrett at PRO Metal Detector Minelab Safari has the ability to hide the cord connecting the reel with the control unit inside the bar, which is certainly very convenient in the field, as the wire does not cling to the branches during the scan.
In addition, the engineers of the company Minelab have developed a smooth adjustment of the height of the rod, which can be quickly used directly in the search process, pressing the foot on the reel. It is very useful in conditions of bumpy terrain and on overgrown vegetation sites when the distance to the Earth abruptly and often changes. Garrett AT PRO also allows you to adjust the height of the rod, but each time you have to rewind the cord.
The control unit of the metal detector Garrett at PRO in addition to the main control and monitor buttons, has a battery compartment, while Minelab Safari uses a bar for the location of the batteries, which at the expense of this expands at the top. In addition, the latter requires twice as much power supply (batteries or batteries) as eight pieces to ensure smooth operation, whereas only four are needed for Garrett.
Another difference-the location of the headphone jack: at Garrett it is on the control unit, and the Minelab also placed on the bar. The armrests of the devices have different design, but boast the convenience of both options can not, but the foam pad on the handle of the rod at detector at PRO is much more convenient, because it has corrugation and stops at both ends, which additionally prevents Slide.
The search coils of the instruments have the same size-11 inches, but different shape: Garrett AT PRO is equipped with an elliptical sensor, and Minelab Safari has a round coil. The detection depth of both sensors is roughly the same, but the Garrett coil is lighter in weight and better shares close targets, and Minelab has a higher speed of examination and sees a little deeper than its fellow, which is achieved by Forms of the soil to be scanned.
In addition, Minelab Safari has a special protection for the reel, protectsing the sensor from scratches and chips, which can affect the quality of scanning and the appearance of phantom signals in the event of moisture ingress into damaged areas of the coil.
Basic functionality and search settings. Unlike the one-frequency Garrett Metal Detector Minelab Safari is a multi-frequency device that can operate in the range from 1.5 to 100 khz, which provides a wider scope of search targets, and at PRO imprisoned for small purposes, and demonstrates Sufficiently high sensitivity on mineralized areas.
The search engine can use several pre-installed programs in both devices, but the number of such modes is different: at Garrett at PRO-six variants of search, and at Minelab Safari only four, but the last has advantage in adjustment of a ground balance, With manual mode in addition to Automatic.
The rest of the functionality of both detectors identical, and the final choice is always the user according to his preferences, and where you find the place.
