Your search (18 kHz) frequency, is very sensitive to the objectives that are often very difficult to detect, as the thin coins, nuggets of gold, jewelry and other small objects.
A significant degree of flexibility in setting allows you to adjust to the field that you want, thanks to the level of iron, the new settings of the threshold of iron and multi-tonos mode.
We chose the instantaneous acoustic signal, instead of an LCD screen because of the extraordinary powers of analysis of human hearing compared to an LCD screen.
LCD displays cannot respond in real time and capture weak signals that are too short or too are located near other signals.
Gold Maxx Power with its beeps provides in real-time the most imperceptible signal.
Our detectors dishes used dual D type, since this coil geometry allows a better penetration in the field.
Metal Detecting Gold Hammered Coin with XP Goldmaxx Power
Finding a Gold Hammered coin of Henry VIII with my Goldmaxx Power this was a total shock as I was just experimenting and this …
Optional elliptical dish 24 x 11 search system improves the selectivity in the area of waste iron, this is the best complement to the GOLD MAXX. You can enjoy the robustness and the quality of our equipment. Due to the fact that a metal detector is usually used in extreme conditions, we have given attention to the most sensitive parts. Gold Maxx Power is being developed and manufactured with quality components and materials, thus guaranteeing a maximum of your XP detector life.
Evolution GOLD MAXX POWER 18 Khz
This evolution of the detector XP GOLD MAXX benefits from a full new electronic circuit, getting new features like:
Headphones Wireless: the transmitter is now integrated in the sensor circuit board. It has been designed with two selectable channels. Switch the frequency shift on the front of the detector allows that the two channels to be switched quickly and easily: CH 1 or CH 2.
Frequency shift: A new switch (freq. SHIFT) allows the frequency of detection (freq. 1 or 2 Freq.) to be adjusted to reduce any interference with other nearby devices XP.
New analog filters improve the detection of targets in iron-infested areas. The circle generated by iron mask is widely reduced.The objectives of interest in iron-filled areas can therefore be detected more easily, thus allowing sweeping operations are carried out more quickly.
We have also enhanced the degree of sensitivity settings, which are now much more accurate. We have increased the range of sensitivity settings, allowing a higher setting in your settings giving you the sensitivity settings more easily.
The Gold Maxx Power remains a detector “multi-tone” is still a “multi-tone” detector, but the user you can now adjust the settings on the level of iron using iron (IRON THRESHOLD) threshold potentiometer.This potenciomentro can be seen as a configuration of detection with a range of only coverage of iron. It has adjustment settings ranging from 0 to 20.
At 0, all iron sounds like a half-tone.The higher the setting, the lower the pitch for detected iron.
This, for example, can detect small nails only to be picked up in a tone lower, while the large is detected in half-tone. As you no doubt already know, too high a level of discrimination can impede the operation of a metal detector.
This setting has been previously established in the appropriate level for the majority of users. But most of the time, beginners do not want iron to start with their machines, while more advanced users prefer this option to make it easier to detect targets in difficult terrain.
Terrain, mute and volume of iron with their levels of settings remain unchanged.
The Gold Maxx Power is also equipped with a powerful circuit board combining performance and choice,-two aspects that is usually very difficult to find together. The Gold Maxx Power surpasses competitors with a similar dish and similar speeds and analysis size.
XP Metal Detectors GOLDMAXX POWER metal detector
Features
* New dish 9 “made of carbon fiber that includes a cover again.
* Heavy-duty cable, designed to resist the constraints of movements
* Connector XP top range, completely resistant to water
* Light and robust electronic box ABS. For maximum comfort, box is placed in the hip (including hip bag). You can also set it on the armrest.
* Light detector and perfectly balanced.
* Unbreakable armrest.
* Axis of 3 parts with double collar locking system.
* Bottom of the stalk made of fiberglass.
* New versatile bag to carry in the hip can be used as a cover of the control box.
Specifications
* Frequency: 18 kHz.
* Mode: movement
* Discrimination multi-mode in the ALL METAL mode
* Microprocessor for signal analysis.
* Volume control for low (volume of iron) tone
* New set-up with “Threshold of iron”, allows you to identify the iron in a very low tone, in a precise way, gives you the control.
* Ground balance: adjustable
* Switch muffler: 3 positions to limit signals false of iron
* Transmitter headphones wireless (new version of channel 2) is already integrated in the circuits of these four new detectors.
* New FREQ SHIFT switch on the front of the detector to reduce any interference with other detectors nearby XP.
-Change the channel of the wireless headphones (CH1/CH2)
-Change the frequency of the detector (frequency 1 / frequency 2).
* Improvement of the graduation of the sensitivity settings
* New and powerful, completely redesigned circuit board, which combines the performance as well as a greater sensitivity to the Winkle ‘Goodies’.
* Faster recovery than the previous models allowing you to find deeper targets near iron.
* Power supply: 8 alkaline AA batteries or 1.5Volts rechargeable NiMH.
* Battery life: alkaline: 50 hours – battery: 50 hours (2300 mAh NiMH)
* Low battery alert
* Indoor coil, backphone FX-01 and included hip bag.
. Your search (18 kHz) …){kind=link}